Gas and Liquid Pressure Sensor

Rango de precios: desde $12.59 hasta $13.93

A compact pressure sensor with a hexagonal body, a 1/4-inch quick connection and a 19 cm cable. Choose an analog voltage or 4–20 mA output to match the supply and input requirements of your monitoring system.

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Guaranteed Safe Checkout

The PPK-QY21 is a compact sensor for gas and liquid pressure monitoring. It combines a hexagonal body with a 1/4-inch quick connection and an attached cable for connection to a compatible monitoring system.

Select the electrical version to match your supply and receiver, then select a pressure range that covers your expected operating conditions. Each configuration is a separate sensor version; the outputs and measurement ranges are not software-selectable modes of one unit.

Key Features

  • Hexagonal body with an illustrated overall length of 40 mm.
  • 1/4-inch quick connection for pressure connection.
  • Analog voltage and 4–20 mA current-output options.
  • 19 cm cable with an XH connector, stated pin pitch 2.54 mm.
  • Positive-only and compound pressure configurations, depending on the selected range.

Technical Specifications

Model PPK-QY21
Measurement application Gas and liquid pressure monitoring
Illustrated body length 40 mm
Illustrated hexagonal cross-section dimension 20.4 mm
Pressure connection 1/4-inch quick connection
Supply and output Version-specific; see selection guide
Operating temperature −40 to +84°C
Comprehensive accuracy, voltage-output type 0.5–1%, including zero drift and temperature drift
Linearity / repeatability, voltage-output type 0.10%
Temperature drift, voltage-output type ±0.04% FS/°C
Long-term stability, voltage-output type Better than 0.2% FS/year
Permissible overpressure, voltage-output type 1.5 times full scale; not a continuous measurement rating
Reverse-polarity protection, voltage-output type Provided
Connector XH, stated 2.54 mm pin pitch
Cable length 19 cm

Model Selection Guide

  • | Version | Supply | Output | Select this version when |
  • | A | 3.3 V DC | 0.5–2.5 V | Your analog input accepts the full 0.5–2.5 V signal and you have a 3.3 V supply. |
  • | B | 5 V DC | 0.5–4.5 V | Your analog input accepts the full 0.5–4.5 V signal and you have a 5 V supply. |
  • | E | 12–24 V DC | 4–20 mA | Your receiver accepts a 4–20 mA current signal and you have the specified DC supply. |
  • The supply voltage and signal type must both match your receiver. A current output cannot be treated as a direct voltage output. For measurements that cross zero, choose a compound range rather than a positive-only range.
  • Available pressure ranges for each A/B/E version:
  • 0 to 100 kPa
  • 0 to 1 MPa
  • 0 to 1.6 MPa
  • 0 to 3 MPa
  • 0 to 3.5 MPa
  • −100 to +100 kPa
  • −100 kPa to +1 MPa
  • −100 kPa to +1.6 MPa
  • −100 kPa to +3 MPa
  • −100 kPa to +3.5 MPa

Applications

  • Gas or liquid pressure monitoring with a receiver that accepts the selected electrical output.
  • Controller-based pressure measurement using the appropriate supply and measurement range.

Wiring / Installation

  • The supplied wiring labels identify red as supply positive, black as supply negative and yellow as signal output. Use the supply specified for the selected version: A 3.3 V, B 5 V, or E 12–24 V DC.
  • For A and B, use a compatible analog voltage input. For E, use a compatible 4–20 mA current input. Do not connect the current output as though it were the A or B voltage signal.

Compatibility & Important Notes

  • The 1/4-inch quick-connection designation does not identify an NPT, BSP or other threaded fitting. Match the actual connection format before planning installation.
  • Use the selected measurement range for normal operation; overpressure tolerance is not an additional measurement range.
  • Voltage-output performance figures apply to the voltage-output type and are not a performance specification for the current-output version.
Electrical Version

A — 3.3 V / 0.5–2.5 V, B — 5 V / 0.5–4.5 V, E — 12–24 V / 4–20 mA

Pressure Range

−100 to +100 kPa, −100 kPa to +1 MPa, −100 kPa to +3.5 MPa, −100 kPa to +3 MPa, 0 to 1.6 MPa, 0 to 100 kPa, 0 to 1 MPa, 0 to 3.5 MPa, 0 to 3 MPa, −100 kPa to +1.6 MPa

Valoraciones

Aún no hay reseñas

Añadir una reseña
Gas and Liquid Pressure Sensor Gas and Liquid Pressure Sensor
Valoración*
0/5
* La valoración es obligatoria
Tu reseña
La reseña es obligatoria
Nombre
* El nombre es obligatorio
Añade fotos o vídeos a tu reseña
Carrito de compra
PPK-QY21 Gas and Liquid Pressure Sensor — PPK-QY21 hexagonal pressure sensor with quick connection and coiled cable on white.Gas and Liquid Pressure Sensor
Rango de precios: desde $12.59 hasta $13.93Seleccionar opciones