The PPK-QY21 is a compact sensor for gas and liquid pressure monitoring. It combines a hexagonal body with a 1/4-inch quick connection and an attached cable for connection to a compatible monitoring system.
Select the electrical version to match your supply and receiver, then select a pressure range that covers your expected operating conditions. Each configuration is a separate sensor version; the outputs and measurement ranges are not software-selectable modes of one unit.
Key Features
- Hexagonal body with an illustrated overall length of 40 mm.
- 1/4-inch quick connection for pressure connection.
- Analog voltage and 4–20 mA current-output options.
- 19 cm cable with an XH connector, stated pin pitch 2.54 mm.
- Positive-only and compound pressure configurations, depending on the selected range.
Technical Specifications
| Model | PPK-QY21 |
|---|---|
| Measurement application | Gas and liquid pressure monitoring |
| Illustrated body length | 40 mm |
| Illustrated hexagonal cross-section dimension | 20.4 mm |
| Pressure connection | 1/4-inch quick connection |
| Supply and output | Version-specific; see selection guide |
| Operating temperature | −40 to +84°C |
| Comprehensive accuracy, voltage-output type | 0.5–1%, including zero drift and temperature drift |
| Linearity / repeatability, voltage-output type | 0.10% |
| Temperature drift, voltage-output type | ±0.04% FS/°C |
| Long-term stability, voltage-output type | Better than 0.2% FS/year |
| Permissible overpressure, voltage-output type | 1.5 times full scale; not a continuous measurement rating |
| Reverse-polarity protection, voltage-output type | Provided |
| Connector | XH, stated 2.54 mm pin pitch |
| Cable length | 19 cm |
Model Selection Guide
- | Version | Supply | Output | Select this version when |
- | A | 3.3 V DC | 0.5–2.5 V | Your analog input accepts the full 0.5–2.5 V signal and you have a 3.3 V supply. |
- | B | 5 V DC | 0.5–4.5 V | Your analog input accepts the full 0.5–4.5 V signal and you have a 5 V supply. |
- | E | 12–24 V DC | 4–20 mA | Your receiver accepts a 4–20 mA current signal and you have the specified DC supply. |
- The supply voltage and signal type must both match your receiver. A current output cannot be treated as a direct voltage output. For measurements that cross zero, choose a compound range rather than a positive-only range.
- Available pressure ranges for each A/B/E version:
- 0 to 100 kPa
- 0 to 1 MPa
- 0 to 1.6 MPa
- 0 to 3 MPa
- 0 to 3.5 MPa
- −100 to +100 kPa
- −100 kPa to +1 MPa
- −100 kPa to +1.6 MPa
- −100 kPa to +3 MPa
- −100 kPa to +3.5 MPa
Applications
- Gas or liquid pressure monitoring with a receiver that accepts the selected electrical output.
- Controller-based pressure measurement using the appropriate supply and measurement range.
Wiring / Installation
- The supplied wiring labels identify red as supply positive, black as supply negative and yellow as signal output. Use the supply specified for the selected version: A 3.3 V, B 5 V, or E 12–24 V DC.
- For A and B, use a compatible analog voltage input. For E, use a compatible 4–20 mA current input. Do not connect the current output as though it were the A or B voltage signal.
Compatibility & Important Notes
- The 1/4-inch quick-connection designation does not identify an NPT, BSP or other threaded fitting. Match the actual connection format before planning installation.
- Use the selected measurement range for normal operation; overpressure tolerance is not an additional measurement range.
- Voltage-output performance figures apply to the voltage-output type and are not a performance specification for the current-output version.






Reviews
There are no reviews yet