Air Pressure Sensor with 6 mm Push-Fit Port

$8.50

A compact air pressure sensor with a 6 mm pneumatic tube push-fit port and a 37 mm sensor body. Select the electrical output and pressure range to match your controller and measurement requirements.

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Guaranteed Safe Checkout

The PPK-QY19 measures gas pressure through a 6 mm pneumatic tube push-fit connection. Its 37 mm body and attached cable provide a compact format for integration into a pressure-monitoring assembly.

Choose the electrical version first, then the pressure range. These are separate hardware configurations: selecting a version does not give one sensor switchable outputs or all pressure ranges.

Key Features

  • 6 mm pneumatic tube push-fit connection.
  • 37 mm illustrated sensor-body length, excluding the cable.
  • Fixed analog voltage and supply-proportional voltage output options.
  • Positive-only and negative-to-positive pressure ranges, depending on version.

Technical Specifications

Model PPK-QY19
Measured medium Gas
Tube connection 6 mm pneumatic tube push-fit
Illustrated body length 37 mm, excluding cable
Supply and output Version-specific; see selection table
Operating temperature −40 to +125°C
Comprehensive accuracy, voltage-output type 0.5–1% FS, including zero error, span error and temperature drift
Hysteresis / repeatability, voltage-output type ≤0.1% FS
Temperature drift, voltage-output type ±0.04% FS/°C
Long-term stability, voltage-output type Better than 0.2% FS/year
Overload, voltage-output type 1.5 × selected range; not a continuous operating rating
Reverse polarity protection, voltage-output type Included

Model Selection Guide

  • | Version | Supply | Output | Available pressure ranges | Selection guidance |
  • | A | 3.3 V | 0.5–2.5 V | −100 to +100; −100 to +1000; 0 to 100 kPa | Choose for an analog input that accepts the full 0.5–2.5 V signal. |
  • | B | 5 V | 0.5–4.5 V | −10 to +10; −100 to +100; −100 to +1000 kPa | Choose for an analog input that accepts the full 0.5–4.5 V signal. |
  • | H | 3.3–5 V | 10–90% of supply | −10 to +10; −100 to +100 kPa | Choose for a receiver designed to read a signal proportional to sensor supply voltage. |
  • For measurements that cross zero, choose a range with a negative lower limit. The 0 to 100 kPa option covers positive pressure only. Select a range that contains your expected minimum and maximum pressure; the same voltage output can represent different pressure spans.
  • For H, 10–90% corresponds to 0.33–2.97 V at a 3.3 V supply, or 0.5–4.5 V at 5 V. These are calculated endpoints, not additional calibration specifications.

Applications

  • Gas-pressure measurement in a controller-based monitoring assembly with a compatible electrical input and selected pressure range.
  • Positive and negative pressure monitoring, using a version whose selected range covers the measurement.

Wiring / Installation

  • The voltage-output wiring illustration identifies red as supply positive, black as supply negative, and yellow as signal output. This three-wire illustration applies to the voltage-output type.
  • Use the supply voltage specified for the selected version. The receiving input must accept the complete output range.

Compatibility & Important Notes

  • The 6 mm specification identifies the pneumatic tube connection, not the sensor-body diameter.
  • Use the selected pressure range as the operating selection limit. An overload rating does not extend the normal measurement range.
Electrical Version

A — 3.3 V / 0.5–2.5 V, B — 5 V / 0.5–4.5 V, H — 3.3–5 V / 10–90% of supply

Pressure Range

0 to 100 kPa, −100 to +100 kPa, −100 to +1000 kPa, −10 to +10 kPa

Valoraciones

Aún no hay reseñas

Añadir una reseña
Air Pressure Sensor with 6 mm Push-Fit Port Air Pressure Sensor with 6 mm Push-Fit Port
Valoración*
0/5
* La valoración es obligatoria
Tu reseña
La reseña es obligatoria
Nombre
* El nombre es obligatorio
Añade fotos o vídeos a tu reseña
Carrito de compra
PPK-QY19 Air Pressure Sensor with 6 mm Push-Fit Port — PPK-QY19 gas pressure sensor with white housing, pneumatic port and cable on a white background.Air Pressure Sensor with 6 mm Push-Fit Port