Pressure Sensor — Analog and Digital Outputs

$9.90

Choose the supply, output interface and pressure range that match your controller. The PPK-MP28 offers seven electrical configurations with ten selectable ranges and a G1/4 threaded connection.

Calculate shipping price

Please fill in the fields below with the shipping destination details in order to calculate the shipping cost.

Guaranteed Safe Checkout

The PPK-MP28 is a compact threaded pressure sensor offered in analog voltage, current and digital-interface configurations. Select the electrical version first, then choose the pressure range for your measurement task. Each combination is a specific purchase configuration, not a promise that one sensor can switch between every output and range.

The G1/4 threaded connection and compact body support integration into a compatible pressure measurement assembly. Match the mating connection, electrical supply and receiving controller before choosing a version.

Key Features

  • Seven electrical options: three analog voltage versions, 4–20 mA, I²C, RS485 and UART.
  • Ten selectable pressure ranges, including options with a negative lower limit.
  • G1/4 threaded process connection.
  • Specified accuracy of ±0.5%FS and operating temperature from −40 to125°C.

Technical Specifications

Model PPK-MP28
Accuracy ±0.5%FS
Operating temperature −40 to125°C
Thread G1/4
Illustrated body dimensions 37 × 20 mm
Supply and output Version-dependent; see selection guide
Selectable pressure ranges 0–100 kPa; 0–1 MPa; 0–1.6 MPa; 0–3 MPa; 0–3.5 MPa; −100–100 kPa; −100 kPa to 1 MPa; −100 kPa to 1.6 MPa; −100 kPa to 3 MPa; −100 kPa to 3.5 MPa

Model Selection Guide

Version Supply / Output Selection guidance
A 3.3 V / 0.5–2.5 V Use with an analog voltage input matching the 0.5–2.5 V signal.
B 5 V / 0.5–4.5 V Use with an analog voltage input matching the 0.5–4.5 V signal.
C 3.3 V / I²C Choose for an I²C controller interface.
D 12–24 V / 0–10 V Choose for a controller accepting a 0–10 V signal.
E 12–24 V / 4–20 mA Choose for a controller accepting a 4–20 mA signal.
F 12–24 V / RS485 Choose for an RS485 physical interface; match the device protocol before integration.
G 3.3–5 V / UART Choose for a UART serial interface.

Applications

  • Controller-based pressure measurement systems using a compatible process connection and receiving interface.

Compatibility & Important Notes

  • Do not apply a 12–24 V supply to a 3.3 V or 5 V version. Match the exact selected supply and output to your controller.
  • Range options containing a negative lower limit are separate versions. Select the required lower and upper limits; do not assume every sensor supports vacuum measurement.
  • FS means full scale. Choose a range appropriate to the expected measurement span rather than treating full-scale accuracy as a percentage of every reading.
  • RS485 specifies the electrical interface; it does not by itself establish Modbus support. This page does not promise an undocumented baud rate, register map or communication protocol.
  • Verify the electrical pin assignments, mating thread and measured-medium compatibility for your installation before applying power or pressure.
Electrical Version

A — 3.3 V / 0.5–2.5 V, B — 5 V / 0.5–4.5 V, C — 3.3 V / I²C, D — 12–24 V / 0–10 V, E — 12–24 V / 4–20 mA, F — 12–24 V / RS485, G — 3.3–5 V / UART

Pressure Range

0–100 kPa, 0–1 MPa, 0–1.6 MPa, 0–3 MPa, 0–3.5 MPa, −100–100 kPa, −100 kPa to 1 MPa, −100 kPa to 1.6 MPa, −100 kPa to 3 MPa, −100 kPa to 3.5 MPa

Reviews

There are no reviews yet

Add a review
Pressure Sensor — Analog and Digital Outputs Pressure Sensor — Analog and Digital Outputs
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
Shopping Cart
PPK-MP28 Pressure Sensor — Analog and Digital Outputs — PPK-MP28 pressure sensor body and threaded port, representing the A, C and G source configurations.Pressure Sensor — Analog and Digital Outputs